Pioneer Process | Aesthetic Cement Coating
page,page-id-18148,page-template,page-template-full_width,page-template-full_width-php,everest-forms-no-js,ajax_fade,page_not_loaded,,qode-content-sidebar-responsive,qode-theme-ver-9.1.3,wpb-js-composer js-comp-ver-,vc_responsive

Aesthetic Cement Coating


We provide a range of aesthetic cement coatings to beautify and preserve your concrete and/or cementitious surfaces. Through sealing, it reveals the beauty of a concrete surface by adding sheen and enhancing the color. It also preserves the decorative treatment by protecting the surface from stains and abrasions. Some sealers form a protective film on the surface of the concrete, while others penetrate into the surface.


Smooth Surface Sealer


A light-gloss; single component, solvent-borne clear acrylic sealer specially formulated for smooth cement surfaces. It is tailored to protect particularly a series of smooth aesthetic cement surfaces such as terrazzo, cement tiles, polished concrete, off-form concrete and other smooth cement substrates. The sealer will provide an aesthetic “wet look” to the coated surface apart from being capable of resisting normal mild attacks and normal stains (such as coffee, carbonated drinks, sauces, etc). It is also UV-resistant, water resistant, non-yellowing and reasonably abrasion resistance.

Packing : 5 litres & 20 litres.

Coverage : Approx. 5m2 per litre per 2 coats.



Ready to use, highly effective silane/siloxane based water repellent impregnating agent for priming concrete, cementitious surfaces, sandstone and other alkaline and mineral substrates. Suitable for porous and absorptive mineral construction materials such as sandstones, slates, cement-based artificial stones, cement-based planter pots, cement/sand/clay/lime bricks, concrete surfaces, cement boards, cement plaster surfaces, primer for exterior paints and coatings, any other cement and mineral surfaces.

Packing : 20 litres.

Coverage : Average 5-10m2 per litre per coat, depending on absorbency of the substrate. The more porous the substrate, the more amount is consumed.



A single component, solvent-borne clear and gloss sealer specially formulated for sealing imprint concrete and cementitious washed aggregates surfaces. It can also be used to seal concrete pavers, slate tiles, flamed granite, and many other cement and rough stone products. The sealer is fast drying and can penetrate 1-2mm into the surface to provide an asethetically attractive “wet look” to the coated surface. It has good alkaline, fungus, stain and UV-resistant properties and also capable of resisting mild acid attack. It is also non-yellowing, non-dusting, hard and reasonably durable.

Packing : 20 litres.

Coverage : Approx. 80m2 per coat per 20-litre tin.



A clear, medium-sheen, water-based high performance acrylic sealer specially formulated with advanced polymer chemistry. It is most suitable for sealing wall surfaces of decorative cement or stone product such as decorative pots, sandstone panels, mineral stone plaster, decorative masonry wall, aggregate wall, granolithic spray tiles, facing bricks, decorative concrete wall, roofing tile, and so on. It can also be used to seal terrazzo surfaces and other decorative cement floor surfaces where a less prominent wet look is preferred. However, the abrasion resistant property is usually less compared with using solvent based sealers and other 2-component type high performance sealers.

Packing : 20 litres.

Coverage : Approx. 8-10m2 per litre per coat, depending on surface porosity.